Kruml Tomáš

RIV - aktuální sběr

Označit vše / Zobrazit vše / Zrušit označení

Nalezeno záznamů: 10

Konferenční příspěvek (mezinárodní konf.)

0570429 - ÚFM 2025 RIV NL eng C - Konferenční příspěvek (zahraniční konf.)
Man, Jiří - Blinn, B. - Šulák, Ivo - Kuběna, Ivo - Smaga, M. - Chlup, Zdeněk - Kruml, Tomáš - Beck, T. - Polák, Jaroslav
Formation of deformation induced martensite in fatigued 316L steels manufactured by selective laser melting (SLM).
Procedia Structural Integrity. Vol. 43. Amsterdam: Elsevier B. V., 2023 - (Pokluda, J.; Šandera, P.), s. 203-208. ISSN 2452-3216.
[MSMF10 - International Conference on Materials Structure and Micromechanics of Fracture /10./. Brno (CZ), 12.09.2022-14.09.2022]
GRANT EU: European Commission(XE) 857124 - Horizont 2020
Institucionální podpora: RVO:68081723
Klíčová slova: Selective laser melting (SLM) * 316L stainless steel * fatigue * deformation induced martensite * cellular dislocation substructure
Obor OECD: Materials engineering
Man, Jiří
Trvalý odkaz: https://hdl.handle.net/11104/0341956

0533365 - ÚFM 2025 RIV CH eng C - Konferenční příspěvek (zahraniční konf.)
Poloprudský, Jakub - Chlupová, Alice - Kruml, Tomáš - Hloch, Sergej - Hlaváček, Petr - Foldyna, Josef
Effect of Standoff Distance on the Erosion of Various Materials.
Advances in Water Jetting. Cham: Springer, 2021 - (Klichová, D.; Sitek, L.; Hloch, S.; Valentinčič, J.), s. 164-171. Lecture Notes in Mechanical Engineering. ISBN 978-3-030-53490-5. ISSN 2195-4356.
[International Conference on Water Jet 2019 - Research, Development, Applications /6./. Čeladná (CZ), 20.11.2019-22.11.2019]
Grant CEP: GA MŠMT LM2015069; GA MŠMT(CZ) LQ1601; GA ČR(CZ) GA19-00408S
Institucionální podpora: RVO:68081723 ; RVO:68145535
Klíčová slova: 316L steel * 6082 alloy * Fatigue * Pulsating water jet * Surface topography * Ti6al4v alloy
Obor OECD: Mechanical engineering; Mechanical engineering (UGN-S)
Kruml, Tomáš
Trvalý odkaz: http://hdl.handle.net/11104/0311769

0533697 - ÚFM 2025 RIV CH eng C - Konferenční příspěvek (zahraniční konf.)
Tinoco Navaro, Hector Andres - Hutař, Pavel - Benoit, M. - Kruml, Tomáš - Göken, M.
Fracture toughness evaluation of a cracked au thin film by applying a finite element analysis and bulge test.
Key Engineering Materials. Vol. 827. Zurich: Trans Tech Publication, 2020 - (Paipetis, S.; Aliabadi, F.), s. 196-202. ISBN 978-3-0357-1586-6. ISSN 1013-9826.
[18th International Conference on Fracture and Damage Mechanics. Rhodos (GR), 16.09.2019-18.09.2019]
Institucionální podpora: RVO:68081723
Klíčová slova: Bulge test * finite element analysis * hin films * fracture toughness * gold film
Obor OECD: Coating and films
Způsob publikování: Open access
Trvalý odkaz: http://hdl.handle.net/11104/0312043

Citace, recenze▾
Citace:
TINOCO, Hector A., Pavel HUTAŘ, Benoit MERLE, Mathias GÖKEN a Tomáš KRUML. Fracture Toughness Evaluation of a Cracked Au Thin Film by Applying a Finite Element Analysis and Bulge Test. Key Engineering Materials [online]. 2019, 827, 196-202 [cit. 2020-10-30]. ISSN 1662-9795

Článek v odborném periodiku

0603916 - ÚGN 2025 RIV IN eng J - Článek v odborném periodiku
Hloch, Sergej - Poloprudský, Jakub - Šiška, Filip - Babinský, Tomáš - Nag, A. - Chlupová, Alice - Kruml, Tomáš
Erosion development in AISI 316L stainless steel under pulsating water jet treatment.
Engineering Science and Technology-An International Journal-JESTECH. Roč. 50, February 2024 (2024), č. článku 101630. ISSN 2215-0986. E-ISSN 2215-0986
Institucionální podpora: RVO:68145535 ; RVO:68081723
Klíčová slova: erosion * wear * pulsating water jet * AISI 316L * stainless steel * surface integrity * subsurface hardening * microhardness
Obor OECD: Mechanical engineering; Mechanical engineering (UFM-A)
Impakt faktor: 5.4, rok: 2024 ; AIS: 0.811, rok: 2024
Způsob publikování: Open access
https://www.sciencedirect.com/science/article/pii/S2215098624000168
Hloch, Sergej
Trvalý odkaz: https://hdl.handle.net/11104/0361212

0582924 - ÚFM 2025 RIV GB eng J - Článek v odborném periodiku
Polák, Jaroslav - Babinský, Tomáš - Vražina, Tomáš - Kruml, Tomáš
Mechanism of intergranular fatigue crack growth in copper polycrystal.
International Journal of Fatigue. Roč. 182, May (2024), č. článku 108190. ISSN 0142-1123. E-ISSN 1879-3452
Grant CEP: GA MŠMT LM2015069; GA MŠMT(CZ) LQ1601
Institucionální podpora: RVO:68081723
Klíčová slova: Extrusions * Fracture surface * Grain boundary * Intergranular crack growth * Intrusions
Obor OECD: Materials engineering
Impakt faktor: 6.8, rok: 2024 ; AIS: 1.066, rok: 2024
Způsob publikování: Omezený přístup
https://www.sciencedirect.com/science/article/pii/S0142112324000483?via%3Dihub
Polák, Jaroslav
Trvalý odkaz: https://hdl.handle.net/11104/0352694

0582926 - ÚFM 2025 RIV GB eng J - Článek v odborném periodiku
Polák, Jaroslav - Man, Jiří - Kruml, Tomáš
The sources of cyclic slip irreversibility.
Acta Materialia. Roč. 267, APR (2024), č. článku 119709. ISSN 1359-6454. E-ISSN 1873-2453
Grant CEP: GA MŠMT(CZ) LQ1601
Institucionální podpora: RVO:68081723
Klíčová slova: Cyclic slip * Extrusions * Intrusions * Irreversibility * Persistent slip bands * Persistent slip markings
Obor OECD: Materials engineering
Impakt faktor: 9.3, rok: 2024 ; AIS: 2.215, rok: 2024
Způsob publikování: Omezený přístup
https://www.sciencedirect.com/science/article/pii/S1359645424000624?via%3Dihub
Polák, Jaroslav
Trvalý odkaz: https://hdl.handle.net/11104/0352696

0585637 - ÚFM 2025 RIV DE eng J - Článek v odborném periodiku
Polák, Jaroslav - Babinský, Tomáš - Vražina, Tomáš - Kruml, Tomáš
The Role of Extrusions and Intrusions in the Initiation and Intergranular Growth of Fatigue Cracks.
Advanced Engineering Materials. Roč. 26, č. 19 (2024), č. článku 2400313. ISSN 1438-1656. E-ISSN 1527-2648
Institucionální podpora: RVO:68081723
Klíčová slova: persistent slip bands * stage-i propagation * high-strain fatigue * mechanisms * copper * model * micromechanisms * nucleation * fracture * metals * crack growths * extrusions * fatigues * intergranular facets * intrusions
Obor OECD: Materials engineering
Impakt faktor: 3.3, rok: 2024 ; AIS: 0.708, rok: 2024
Způsob publikování: Omezený přístup
https://onlinelibrary.wiley.com/doi/10.1002/adem.202400313
Polák, Jaroslav
Trvalý odkaz: https://hdl.handle.net/11104/0353320

0578316 - ÚFM 2025 RIV GB eng J - Článek v odborném periodiku
Polák, Jaroslav - Jadlovský, Dan - Kruml, Tomáš
Extrusions and intrusions in the cyclic plastic zone of the growing fatigue crack in polycrystalline copper.
International Journal of Fatigue. Roč. 179, Feb (2024), č. článku 108063. ISSN 0142-1123. E-ISSN 1879-3452
Grant CEP: GA MŠMT LM2015069; GA MŠMT(CZ) LQ1601
Institucionální podpora: RVO:68081723
Klíčová slova: Persistent slip markings * Extrusions * Intrusions * Cyclic plastic zone * Intergranular crack path
Obor OECD: Materials engineering
Impakt faktor: 6.8, rok: 2024 ; AIS: 1.066, rok: 2024
Způsob publikování: Omezený přístup
https://www.sciencedirect.com/science/article/pii/S0142112323005649?via%3Dihub
Polák, Jaroslav
Trvalý odkaz: https://hdl.handle.net/11104/0352648

0598139 - ÚFM 2025 RIV GB eng J - Článek v odborném periodiku
Roth, J. - Šulák, Ivo - Kruml, Tomáš - Polkowski, W. - Dudziak, T. - Böhlke, P. - Krupp, U. - Jahns, K.
Establishing a process route for additive manufacturing of NiCu-based Alloy 400: an alignment of gas atomization, laser powder bed fusion, and design of experiments.
International Journal of Advanced Manufacturing Technology. Roč. 134, 7-8 (2024), s. 3433-3452. ISSN 0268-3768. E-ISSN 1433-3015
GRANT EU: European Commission(XE) 958192 - HORIZON 2020
Institucionální podpora: RVO:68081723
Klíčová slova: mathematical-model * stainless-steels * cooling rates * metal * microstructure * nickel * aluminum * segregation * limitations * porosity * Alloy 400 * Monel * Gas atomization * Additive manufacturing * Laser powder bed fusion * Design of experiments
Obor OECD: Materials engineering
Impakt faktor: 3.1, rok: 2024 ; AIS: 0.517, rok: 2024
Způsob publikování: Open access
https://link.springer.com/article/10.1007/s00170-024-14328-7
Trvalý odkaz: https://hdl.handle.net/11104/0355905

0577421 - ÚGN 2025 RIV CH eng J - Článek v odborném periodiku
Říha, Zdeněk - Zeleňák, Michal - Nag, Akash - Poloprudský, Jakub - Kruml, Tomáš - Hloch, Sergej
A study of the erosion characteristics of an EN AE-6060 aluminium alloy processed using middle and high power continuous and modulated water jets.
Wear. 536-537, January 2024 (2024), č. článku 205154. ISSN 0043-1648. E-ISSN 1873-2577
Grant CEP: GA ČR(CZ) GA23-05235S
Institucionální podpora: RVO:68145535 ; RVO:68081723
Klíčová slova: modulated water jet * continuous water jet * self-excitation water flow * hydrodynamic nozzle * material erosion
Obor OECD: Mechanical engineering; Mechanical engineering (UFM-A)
Impakt faktor: 6.1, rok: 2024 ; AIS: 0.888, rok: 2024
Způsob publikování: Omezený přístup
https://www.sciencedirect.com/science/article/pii/S0043164823005379?via%3Dihub
Zeleňák, Michal
Trvalý odkaz: https://hdl.handle.net/11104/0346566